No Access to WHM

Stephan Pringle Tuesday, March 14, 2017

If you have no access to WHM from your home or office, log into your cable modem and see if these settings are enabled. If they are, then you have discovered the cause and will need to lower the blocking settings permanently or temporary when you need to connect to WHM.

LAN-to-WAN: Allow as per below.
HTTP and HTTPS (TCP port 80, 443)
DNS (TCP/UDP port 53)
NTP (TCP port 119, 123)
email (TCP port 25, 110, 143, 465, 587, 993, 995)
VPN (GRE, UDP 500, TCP 1723)
iTunes (TCP port 3689)

WAN-to-LAN: Block all unrelated traffic and enable IDS.

Related posts:

  1. No Access to cPanel
  2. No Access to Webmail
  3. Port Scanning
  4. Ports
  5. Root SSH Direct Access

Stephan Pringle

About The Author: Stephan Pringle is an Information Technology Support Specialist. He covers hardware and software and provides tips for you to troubleshoot and repair issues on your own. In his spare time, he writes articles about the State of New York on his Hackintosh and HackBook and that has helped him to become the top contributor of the New York City section of Yahoo! Answers.

Related Posts